BelleFlex™ Home / Products / Metric Series Bellevilles

Metric Series Bellevilles (DIN 2092/2093)

If you are looking for a Belleville disc spring for a dynamic application, you have come to the right place. These disc springs are manufactured to DIN 2092 standards. When forces and deflections are critical, or when large numbers of cycles are required, this series should be your first place to look.  Below is a list of “standard” sizes, however, we are not limited to these sizes. We manufacture many custom Bellevilles.


The material for the part numbers shown is 1074/1075 High Carbon Steel (t < 0.050”) or 6150 Alloy Steel. Other materials available include the following.

• 301 Stainless Steel
• 17-4 PH Stainless Steel
• 17-7 PH Stainless Steel
• INCONEL 718 Alloy
• INCONEL X-750 Alloy

Load values vary, based on the material used.

Part numbers ending in "-RT" are provided with flats (load-bearing surfaces). The thickness is reduced to compensate for an increased load, due to a shortened lever arm between the load points. The Load values are based on an equivalent deflection of the disc spring without flats.